TOWN GAS EQUIPMENT PRODUCT GUIDE Ver.1.0
22/48

● Specications ModelYP-756FETarget gasTown Gas (for 12A/13A gases lighter than air), CO in combustion exhaustSensorSnO2-based semiconductor sensorPower indicatorPower lamp (green LED)Gas density for detectionTown GasWarning: Less than alarm gas density Alarm: Less than 1/4 of lower limit for gas explosion (within 1 minute)COWarning: 50 to 300 ppm within 10 minutesAlarm: Less than 550 ppm within 5 minutesAlarm methodTown GasWarning: Red (gas leak alarm) lamp ashesAlarm: Red (gas leak alarm) lamp lit, alarm sounds at more than 70 dB/mCOWarning: Yellow (CO alarm) lamp ashes Alarm sound more than 70 dB/m after 5 minutesAlarm: Yellow (CO alarm) lamp lit, alarm sounds at more than 70 dB/mOperating temperature range0 to +50 ºC (without condensation)Power supplyAC 100 V 50/60 HzPower consumptionApprox. 0.7 W during monitoring; Approx. 0.9 W during alarmFunction● Alarm prevention function when power is on ● Gas detection function ● Gas sensor temperature compensation function ● Failure monitoring function ● Speaker disconnection detection function ● Alarm stop functionExternal outputDC 6 V during monitoring; DC 0 V during power-off / failureTown Gas: DC 12 V during alarm, CO gas: DC 18 VPower cordLength 2.5 m, with additional outlet (maximum 1,490W available)Emergency lightIn a blackout: High luminescence with 2 white LEDs at less than 1 lux in frontNight lightDuring normal monitoring: 2 white LEDs lit (brightness can be adjusted in 3 steps)Installation methodWall mounting (mounting plate is usable)External dimensionsH125 × W85 × D32.5 mmWeightApprox. 250 gPackaging unit20 pcs* The alarm sound can be stopped for 5 minutes using the alarm stop switch (except for CO high-density alert).● Specications ModelYP-756FTarget gasTown Gas (for 12A/13A gases lighter than air), CO in combustion exhaustSensorSnO2-based semiconductor sensorPower indicatorPower lamp (green LED)Gas density for detectionTown GasWarning: Less than alarm gas density Alarm: Less than 1/4 of lower limit for gas explosion (within 1 minute)COWarning: 50 to 300 ppm within 10 minutesAlarm: Less than 550 ppm within 5 minutesAlarm methodTown GasWarning: Red (gas leak alarm) lamp ashesAlarm: Red (gas leak alarm) lamp lit, alarm sounds at more than 70 dB/mCOWarning: Yellow (CO alarm) lamp ashes Alarm sound more than 70 dB/m after 5 minutesAlarm: Yellow (CO alarm) lamp lit, alarm sounds at more than 70 dB/mOperating temperature range0 to +40 ºC (without condensation)Power supplyAC 100 V 50/60 HzPower consumptionApprox. 0.7 W during monitoring; Approx. 1.0 W during alarmFunction● Alarm prevention function when power is on ● Gas detection function ● Gas sensor temperature compensation function ● Failure monitoring function ● Speaker disconnection detection function ● Alarm stop functionExternal outputDC 6 V during monitoring; DC 0 V during power-off / failureTown Gas: DC 12 V during alarm, CO gas: DC 18 VPower cordLength 2.5 m, with additional outlet (maximum 1,490 W available)Installation methodWall mounting (mounting plate is usable)External dimensionsH125 × W85 × D32.5 mmWeightApprox. 250 gPackaging unit20 pcs* The alarm sound can be stopped for 5 minutes using the alarm stop switch (except for CO high-density alarm).An alarm with a value-added function that turns on the emergency light in the event of a blackout.Catcher(Town Gas, CO Alarm)YP-756FECatcher(Town Gas, CO Alarm)YP-756FA simple design. Alarms through an easy to understand voice and lamps.21GasCO (carbon monoxide)Wall mountingEmergency lightNight lightGasCO (carbon monoxide)Wall mountingCatcher (Town Gas, CO Alarm)

元のページ  ../index.html#22

このブックを見る